Tag Archives: farm

BlenderFarm Components

The following components were used to build the BlenderFarm

Computers:

3x custom built office systems with dual-core Pentium D’s ranging from 2.4-2.8GHz

3x Dell Dimension 5150’s with Pentium 4 HT 3.0GHz processors

1x Dell Dimension E520 with a dual-core Pentium D

1x Dell Dimension 3000 with a P4 HT 3.06GHz processor

Power & Networking:

1x Belkin F9D1000-15 10 Outlet 885 Joule Metal SurgeMaster

1x TP-Link TL-SG1008D 8-port Gigabit Unmanaged Switch

1x TP-Link TL-SF1005D 5-port Fast Ethernet Unmanaged Switch

1x TP-Link TL-PA2010 AV200 Nano Powerline Adapter (cheaper than buying 8 wifi dongles)

1x 1ft Cat5e UTP cable

1x 2ft Cat5e UTP cable

2x 3ft Cat5e UTP cable

3x 5ft Cat5e UTP cable

1x 7ft Cat5e UTP cable

BlenderFarm Ep. 3

November 14, 2013

Yesterday, I installed Debian Wheezy onto one system, and loaded up blender to auto start with network render selected, and have the user auto login.

Today I cloned each drive off of that one original, with the exception of 2 drives, one which needed to have 32-bit debian and blender installed, and another which had fewer sectors than the source drive, so I manually installed on that drive as well. Also checked the BIOS settings for each box, set up VNC, manual IP in accordance with node number, and changed the hostnames to reflect the node number.

After dinner, I plugged the power cords in and did some cable management. They’re all ready to go once the power strip and network stuff gets here.

1470378_10152056966835844_1058747138_n

 
definition

BlenderFarm Ep. 2

November 13, 2013

Today, I cleared off the metal shelving unit where I am putting the render nodes.

1456640_10152057805425844_1586694122_n

Took a while to get all the stuff off of the racks, there was a few years of junk on those shelves. Found some stuff from when I was at SCAD in 2008 for the Rising Star program. Made me remember how much I disliked 2D Design.

Once the shelves were cleared off, I disassembled the unit and started measuring the system cases to see how far apart the shelves would need to be. The tallest case was 16″ So that gave me room for all 4 shelves, as long as the last one was at the very top.

Once I reassembled the shelves I loaded the systems onto them in order to get them off the floor in the utility room.

1462087_10152052879050844_2131406900_n

BlenderFarm Ep. 1

November 12, 2013

Today I recieved a message from a family friend that a retirement community in Winter Park was ready to get rid of 9 computer systems as part of their upgrade from Windows XP to Windows 7, so naturally I said I would take them. Thus began the BlenderFarm saga.

I arrived at the facility at 3PM and proceeded to the front desk to meet my friend, who then lead me back to her office to get a cart. Then to the room with the treasure trove! The computer guy there had stacked 5 Dell Dimension systems, and 4 custom built systems, all ready to go. So I gratefully loaded them onto the cart and carried them out to my mom’s Suburban, which I had been lent for the day.

Here’s an image of the first systems I loaded into the trucksystems in car

So I went back in and got the last 3, loaded them up and headed for home!

When I got back home at around 5:30 that evening, I immediately unloaded all the systems into the utility room, I’m sure the dog was thrilled.

1452333_10152057794875844_1998600881_n